Carectère 501 MULTI □ (4 * 3 x 3m)

FRAME

4 free pole umbrellas with crank handle.
Pole and ribs are aluminium powder coated.
Pole profile: 150 x 150 x 2,5 mm, 5,9 x 5,9 x 0,1".
Ribs profile: 32 x 32 x 2,5 mm, 1,2 x 1,2 x 0,1".

CANOPY

320g/m2 Sunbrella® Plus, 100% solution dyed acrylic.

BASE

Hot galvanized and powder coated steel plates.

TILT

Tilt in height

WIND SPEED

58 km/h, 36 mph - Maximum wind speed to which the
umbrella may be exposed

JCP.5 Series Technical Data

JCP.5 Series Manual

Care Guide

In Ground Base Manual

On Ground Base Manual

To enhance the durability and appearance, we recommend following our care instructions regularly.

• The umbrella should never be used in strong wind or rainy conditions. An open umbrella should never be left unattended.
• The umbrella should be protected against blurring or damage by using its protection cover.
• The protection cover can be placed over the umbrella and pole. Store the umbrella in a dry place when not in use.

FRAME & BASE 

Clean the aluminium frame with a damp cloth, mild soap and water. Do not use any sharp tool to avoid scratches.

CANOPY 

Before use, you can apply an invisible film to make the canopy stain and water repellent by using a textile protector. You can maintain and clean your canopy by following a few simple steps:

• Brush off loose dirt before it becomes embedded in the fabric.
• Hose down.
• Spot clean soon after stains occur with water and mild soap or a textile cleaner (no detergents).
• Use a soft bristle brush to clean.
• Allow soap to soak in.
• Rinse thoroughly.
• Always let the canopy air dry completely before storing or covering.

Machine wash in cold water. Depending on wash load size, use normal amounts of mild laundry detergent and add 1 cup of bleach. Allow fabric to air dry.

NEVER SUBJECT TO EXCESSIVE HEAT, STEAM PRESS OR TUBLE DRY AS THE FABRIC WILL SHRINK